|
|
|
18 of 18 Pregnancy Test(s) |
|
|
|
 |
|
| Manufacturer / Brand: | Early-Pregnancy-Tests.com |
| Price Range: | See 8TOP Retailers Below |
| Product Type: | Strip
|
| Earliest Test Accuracy: | 6 to 8 days after conceiving |
| Sensitivity: | 20 mlU/ml/hCG |
| Confirmed Results In: | 5 minutes
|
| Results Display: | Negative: Only one color band appears on the control region. No apparent band on the test region. This indicates that no pregnancy has been detected.
Positive: Distinct color bands appear on the control and test regions. Presence of both test line and control line indicate that you are pregnant. The color intensity of the test
bands may vary since different stages of pregnancy have different concentrations of HCG hormone. NOTE: A positive test line will appear directly below the control line on the same
test surface (or 'result window' area). Any line or accumulation of color/dye that appears at the juncture between test components should not be mistaken for "test line" (this is only the
source of the test reagent & dye).
Invalid: No visible band at all. The control band will not appear if an insufficient volume of specimen is added into the test kit. Proper procedures may not have been followed
in performing the test. Repeat with a new test kit. Please consult above instructions and follow precisely. |
|
|
|
|
|
|
|
 |
Detect your pregnancy earlier with sensitive pregnancy test strips. Now you can accurately detect your pregnancy as early as 6 to 8 days
after conceiving - days before your first missed period. Our FDA-approved pregnancy tests are:
- 99.9% accurate
- Highly sensitive, detecting hCG at levels of just 20 mlU/ml/hCG
- The same style of tests used at your doctor's office
- "Just manufactured" with roughly 2-year expiration dates
- Individually packaged in sealed foil pouches (one test per pouch)
|
|
Directions: - To begin testing, open the sealed pouch by tearing along the notch. Remove the test from the pouch. Note: First morning urine usually contains
the highest concentration of hCG and is therefore the best sample when performing the urine test. However, randomly collected urine specimens may be used.
- Holding the strip vertically, carefully dip it into the specimen (you may collect your urine in a clean, dry container). Immerse the strip into the urine sample with the arrow
end pointing towards the urine. Do not immerse past the MAX Line (Marker Line). Take the strip out after 3 seconds and lay the strip flat on a clean, dry, non-absorbent surface.
(Note: In rare instances when dye does not enter the result area, dip the tip of the test strip in the urine as instructed above until the dye begins traveling across the white result area).
- Wait for colored bands to appear. Depending on the concentration of hCG in the test specimen, positive results may be observed in as little as 40 seconds. However, to
confirm negative results, the complete reaction time of 5 minutes is required. It is important that the background is clear before the result is read. Do not read results after the specified reaction time.
|
|
Recommended Time of Day for Use:
Morning |
|
Product Packaging:
Pouch |
|
Product Shelf Life:
2 years |
|
Standard Accuracy:
99.9%
|
|
|
|
