Negative: Only one pink colored band appears on the control region. No apparent band on the test region.
Positive: Distinct pink color bands appear on the control and test
regions. The color intensity of the test bands may vary since
different stages of pregnancy have different concentrations of
hCG hormone.
Invalid: No line appears in the control zone (C), the test should be
voided since an improper test procedure may have been
performed or deterioration of reagents may have occurred. This is
due to the internal control built in which a distinct control region (C)
line should always appear. Repeat the test using a new device. If
the problem persists, discontinue using the test kit immediately
and contact your local distributor.
One Step Strip Style hCG Urine Pregnancy Test is a test kit for the determination of hCG (Human Chorionic Gonadotropin) in urine specimens.
This test kit is used to obtain a visual qualitative result for early detection of pregnancy.
FDA Cleared & CLIA Waived!
99%overall accuracy
100% Specificity - No cross reaction with FSH, LH or TSH
Sensitivity of 20 mIU/mL
Room temperature storage with built-in procedural control
Standardized with WHO International Reference Standard
A highly sensitive & accurate test kit for the early detection of pregnancy
Easy to use dip-and-read format
Detects pregnancy as early as the first day of the missed period
Results ready as fast as 5 minutes
Directions:
Allow the test and the specimen to equilibrate to room
temperature 15-30°C (59-86°F) prior to testing.
To begin testing, open the sealed pouch by tearing along the
notch. Remove the test strip from the pouch and use it as
soon as possible.
Dip the strip with arrow putting down into the urine sample for
about 10 seconds. Do not immerse past the "Mark" line.
Take the strip out and lay it flat on a clean, dry and nonabsorbent
surface.
Wait for the pink colored bands to appear. Depending on the
concentration of hCG in the test specimen, positive results
may be observed in as soon as 40 seconds. However, to
confirm negative results, the complete reaction time of 5
minutes is required. It is important that the background is
clear before the result is read.
